Our mild steel products are sourced and supplied globally. At AHAN NAVARD, we supply, a wide range of carbon steel products in a variety of sizes and grades according to international specifications, conforming to extremely close dimensional tolerances and accurate chemical and mechanical properties.
With long standing relationships with reliable producers we export carbon steel long products such as wires, rebars, angles, channels, I-beam, TMT bar, Flat Bar, and round bars.
Having exceptional business relation with high quality and reliable manufacturers in china, we import hot rolled and cold rolled steel products in variety of sizes and types such basic HR and CR structural steel, galvanized steel, tin plate , and color coated products.
STEEL CLASSIFICATION ACCORDING TO EN 10027-2 | ||
1.0XXX | Non-alloy steels | Number = 1.00XX Base steels |
Number = 1.01XX Quality steel (General structural steels with Rm < 500 MPa ) | ||
Number = 1.02XX Other structural steels (Not intended for heat treatment with Rm < 500 MPa ) | ||
Number = 1.03XX Steels with average C < 0,12% or Rm < 400 MPa | ||
Number = 1.04XX Steels with average 0,12% =< C < 0,25% or 400 MPa = < Rm < 500 MPa | ||
Number = 1.05XX Steels with average 0,25% =< C < 0,55% or 500 MPa =< Rm < 700 MPa | ||
Number = 1.06XX Steels with average C >= 0,55% or Rm >= 700 MPa | ||
Number = 1.07XX Steels with higher P or S content | ||
1.0XXX | Alloy Steels | Number = 1.08XX Steels with special physical properties |
Number = 1.09XX Steels for other applications | ||
1.1XXX | Non-alloy special steels | Number = 1.10XX Steels with special physical properties |
Number = 1.11XX Structural pressure vessel and engeneering steels with C < 0,5% | ||
Number = 1.12XX Structural pressure vessel and engeneering steels with C > = 0,5% | ||
Number = 1.13XX Structural pressure vessel and engeneering steels with special requirements | ||
Number = 1.14XX – | ||
Number = 1.15XX Tool steel | ||
Number = 1.16XX Tool steel | ||
Number = 1.17XX Tool steel | ||
Number = 1.18XX Tool steel | ||
Number = 1.19XX – | ||
1.2XXX | Alloy Tool Steels | Number = 1.20XX Cr |
Number = 1.21XX Cr-Si, Cr-Mn, Cr-Mn-Si | ||
Number = 1.22XX Cr-V, Cr-V-Si, Cr-V-Mn, Cr-V-Mn-Si | ||
Number = 1.23XX Cr-Mo, Cr-Mo-V, Mo-V | ||
Number = 1.24XX W, Cr-W | ||
Number = 1.25XX W-V, Cr-W-V | ||
Number = 1.26XX W excluding groups 24, 25 and 27 | ||
Number = 1.27XX With Ni | ||
Number = 1.28XX Other | ||
Number = 1.29XX – | ||
1.3XXX | Alloy Miscellaneous Steels | Number = 1.30XX – |
Number = 1.31XX – | ||
Number = 1.32XX High speed steel with Co | ||
Number = 1.33XX High speed steel without Co | ||
Number = 1.34XX – | ||
Number = 1.35XX Bearing steels | ||
Number = 1.36XX Materials with special magnetic properties without Co | ||
Number = 1.37XX Materials with special magnetic properties and with Co | ||
Number = 1.38XX Materials with special physical properties without Ni | ||
Number = 1.39XX Materials with special physical properties and with Ni | ||
1.4XXX | Stainless and Heat Resisting steels | Number = 1.40XX Stainless steel with Ni < 2.5 % without Mo, Nb and Ti |
Number = 1.41XX Stainless steel with Ni < 2.5 % and Mo but without Nb and Ti | ||
Number = 1.42XX – | ||
Number = 1.43XX Stainless steel with Ni >= 2.5 % without Mo, Nb and Ti | ||
Number = 1.44XX Stainless steel with Ni > = 2.5 % with Mo but without Nb and Ti | ||
Number = 1.45XX Stainless steels with special additions | ||
Number = 1.46XX Chemical resistant and high temp Ni alloys | ||
Number = 1.47XX Heat resistant steels with Ni < 2.5 % | ||
Number = 1.48XX Heat resistant steels with Ni > = 2.5 % | ||
Number = 1.49XX Materials with elevated temperature properties | ||
1.5XXX | Structural, pressure vessel and engineering steels | Number = 1.50XX Mn-Si-Cu |
Number = 1.51XX Mn-Si, Mn-Cr | ||
Number = 1.52XX Mn-Cu, Mn-V, Si-V, Mn-Si-V | ||
Number = 1.53XX Mn-Ti, Si-Ti | ||
Number = 1.54XX Mo, Nb, Ti, V, W | ||
Number = 1.55XX B, Mn-B Mn < 1.65 % | ||
Number = 1.56XX Ni | ||
Number = 1.57XX Cr-Ni with Cr < 1.0 % | ||
Number = 1.58XX Cr-Ni with 1.0 % =< Cr < 1.5 % | ||
Number = 1.59XX Cr-Ni with 1.5 % =< Cr < 2 % | ||
1.6XXX | Structural, pressure vessel and engineering steels | Number = 1.60XX Cr-Ni with 2 % =< Cr < 3 % |
Number = 1.61XX – | ||
Number = 1.62XX Ni-Si, Ni-Mn, Ni-Cu | ||
Number = 1.63XX Ni-Mo, Ni-Mo-Mn, Ni-Mo-Cu, Ni-Mo-V, Ni-Mn-V | ||
Number = 1.64XX – | ||
Number = 1.65XX Cr-Ni-Mo with Mo < 0.4 % + Ni < 0.2 % | ||
Number = 1.66XX Cr-Ni-Mo with Mo < 0.4 % + 2.0 % =< Ni < 3.5 % | ||
Number = 1.67XX Cr-Ni-Mo with Mo < 0.4 % + 3.5 % =< Ni < 5 %, or Mo >= 0.4 % | ||
Number = 1.68XX Cr-Ni-V, Cr-Ni-W, Cr-Ni-V-W | ||
Number = 1.69XX Cr-Ni except groups 57 to 68 | ||
1.7XXX | Structural, pressure vessel and engineering steels | Number = 1.70XX Cr, Cr-B |
Number = 1.71XX Cr-Si, Cr-Mn, Cr-Mn-B, Cr-Si-Mn | ||
Number = 1.72XX Cr-Mo with Mo < 0.35 % , Cr-Mo-B | ||
Number = 1.73XX Cr-Mo with Mo >= 0.35 % | ||
Number = 1.74XX – | ||
Number = 1.75XX Cr-V with Cr < 2.0 % | ||
Number = 1.76XX Cr-V with Cr >= 2.0 % | ||
Number = 1.77XX Cr-Mo-V | ||
Number = 1.78XX – | ||
Number = 1.79XX Cr-Mn-Mo, Cr-Mn-Mo-V | ||
1.8XXX | Structural, pressure vessel and engineering steels | Number = 1.80XX Cr-Si-Mo, Cr-Si-Mn-Mo, Cr-Si-Mo-V, Cr-Si-Mn-Mo-V |
Number = 1.81XX Cr-Si-V, Cr-Mn-V, Cr-Si-Mn-V | ||
Number = 1.82XX Cr-Mo-W, Cr-Mo-W-V | ||
Number = 1.83XX – | ||
Number = 1.84XX Cr-Si-Ti, Cr-Mn-Ti, Cr-Si-Mn-Ti | ||
Number = 1.85XX Nitriding steels | ||
Number = 1.86XX – | ||
Number = 1.87XX Steels not for heat treatment by user | ||
Number = 1.88XX High strength weldable steels not intended for heat treatment by user | ||
Number = 1.89XX High strength weldable steels not intended for heat treatment by user | ||
1.9XXX | Non-alloy Quality steels | Number = 1.90XX Base steels |
Number = 1.91XX Quality steel (General structural steels with Rm < 500 MPa ) | ||
Number = 1.92XX Other structural steels (Not intended for heat treatment with Rm < 500 MPa ) | ||
Number = 1.93XX Steels with average C < 0,12% or Rm < 400 MPa | ||
Number = 1.94XX Steels with average 0,12% =< C < 0,25% or 400 MPa = < Rm < 500 MPa | ||
Number = 1.95XX Steels with average 0,25% =< C < 0,55% or 500 MPa =< Rm < 700 MPa | ||
Number = 1.96XX Steels with average C >= 0,55% or Rm >= 700 MPa | ||
Number = 1.97XX Steels with higher P or S content | ||
2.XXXX | Alloy | Number = 2.XXXX |
Steel and Cast Iron Standards | |
EN 1561 | Founding. Grey cast irons |
ENĀ 1562 | Founding. Malleable cast irons |
EN 1563 | Founding. Spheroidal graphite cast irons |
EN 1564 | Founding. Austempered ductile cast irons |
EN 12513 | Founding. Abrasion resistant cast irons |
EN 13835 | Founding. Austenitic cast irons |
EN ISO 4957 | Tool steels |
EN 10016 | Non-alloy steel rods for drawing and/or cold rolling |
EN 10025 | Technical delivery conditions for structural steels |
EN 10028 | Flat products made of steels for pressure purposes |
EN 10083 | Steels for quenching and tempering |
EN 10084 | Case hardening steels |
EN 10085 | Nitriding steel |
EN 10087 | Free cutting steels |
EN 10088 | Stainless steels |
EN 10089 | Hot rolled steels for quenched and tempered springs |
EN 10090 | Valve steels and alloys for internal combustion engines |
EN 10095 | Heat Resisting Steels and Nickel Alloys |
EN 10106 | Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state |
EN 10107 | Grain-oriented electrical steel sheet and strip delivered in the fully processed state |
EN 10111 | Continuously hot rolled low carbon steel sheet and strip for cold forming |
EN 10113 | Hot-rolled products in weldable fine grain structural steels |
EN 10120 | Steel sheet and strip for welded gas cylinders |
EN 10130 | Cold rolled low carbon steel flat products for cold forming |
EN 10132 | Cold rolled narrow steel strip for heat treatment |
EN 10137 | Plates and wide flats made of high yield strength structural steels in the quenched and tempered conditions |
EN 10139 | Cold rolled uncoated mild steel narrow strip for cold forming |
EN 10142 | Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming |
EN 10147 | Continuously hot-dip zinc coated structural steels strip and sheet |
EN 10149 | Specification for hot-rolled flat products made of high yield strength steels for cold forming |
EN 10151 | Stainless steel strip for springs |
EN 10152 | Electrolytically zinc coated cold rolled steel flat products for cold forming |
EN 10154 | Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet |
EN 10162 | Cold rolled steel sections |
EN 10202 | Cold reduced tinmill products. Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel |
EN 10207 | Steels for simple pressure vessels |
EN 10208 | Steel pipes for pipelines for combustible fluids |
EN 10209 | Cold rolled low carbon steel flat products for vitreous enamelling |
EN 10210 | Hot finished structural hollow sections of non-alloy and fine grain steels |
EN 10213 | Steel castings for pressure purposes |
EN 10216 | Seamless steel tubes for pressure purposes |
EN 10217 | Welded steel tubes for pressure purposes |
EN 10219 | Cold formed welded structural hollow sections of non-alloy and fine grain steels |
EN 10222 | Steel forgings for pressure purposes |
EN 10224 | Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids |
EN 10225 | Weldable structural steels for fixed offshore structures |
EN 10248 | Hot rolled sheet piling of non alloy steels |
EN 10250 | Open steel die forgings for general engineering purposes |
EN 10253 | Butt-welding pipe fittings |
EN 10255 | Non-alloy steel tubes suitable for welding and threading |
EN 10263 | Steel rod, bars and wire for cold heading and cold extrusion |
EN 10265 | Magnetic materials. Specification for steel sheet and strip with specified mechanical properties and magnetic permeability |
EN 10267 | Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
EN 10268 | Cold rolled steel flat products with high yield strength for cold forming |
EN 10269 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
EN 10272 | Stainless steel bars for pressure purposes |
EN 10273 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
EN 10277 | Bright steel products |
EN 10283 | Corrosion resistant steel castings |
EN 10292 | Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming |
EN 10293 | Steel castings for general engineering uses |
EN 10295 | Heat resistant steel castings |
EN 10296 | Welded circular steel tubes for mechanical and general engineering purposes |
EN 10297 | Seamless circular steel tubes for mechanical and general engineering purposes |
EN 10302 | Creep resisting steels, nickel and cobalt alloys |
EN 10305 | Steel tubes for precision applications |
EN 10326 | Continuously hot-dip coated strip and sheet of structural steels |
EN 10327 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming |
EN 10331 | Magnetic materials. Specification for sintered soft magnetic materials |
EN 10336 | Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming |
EN 10340 | Steel castings for structural uses |
EN 10341 | Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state |
EN 10346 | Continuously hot-dip coated steel flat products |
EN 10349 | Steel castings. Austenitic manganese steel castings |